Publicité
Fan operation : Always operate the fan in the upright position following all instructions
and recommendations listed in this manual.
Fan connection : Plug fan directly into a standard electrical outlet (120- volt A.C., 60
Hz). Ensure the plug fits tightly in the outlet. A loose connection may cause overheating
and damage to the plug or fan.
Note : To prevent overloading a circuit, do not plug the fan into a circuit that is servicing
other electrical devices.
Oscillation and Speed Control : Pull the left string for oscillation. Pull the right string for
speed setting. The fan will cycle through the following speed settings:
To Adjust Airflow Upward Or Downward : Loosen the position screw first and then
loosen the pivot nut. Tilt the motor to the desired angle then firmly tighten the pivot nut
first and then tighten the position screw.
To Adjusting Fan Height : Loosen the L-shape screw on the fan pipes. Adjust the fan to
the desired height and tighten the L-shape screw.
OPERATING INSTRUCTIONS
• OFF
• LOW
• MED
• HIGH
PFNC-30DX
LOW
OFF
Each pull of the string
will cycle through the
settings.
HIGH
MED
-5-
Publicité
