Publicité
Technical specifications
Supply voltage
Valve pressure
Valve diameter
Valve closing/opening time
Torque
Wi-Fi frequency
Wi-Fi transmission power
Installation guide
•
Install the bracket on the smart valve ear. Attention: the screw must not
be tightened completely.
•
Fix the bracket on the water or gas pipe.
•
Adjust the position of the smart valve so that the axis of the valve is in line
with the axis of the handle of the water or gas faucet.
•
Tighten the screw at both ends of the mounting bracket.
•
After installing the valve, manually pull the valve release ring.
•
Place the smart valve handle on the faucet handle.
•
Check if the valve handle is perfectly overlapped on the faucet handle.
•
Tighten the 2 screws of the smart valve handle.
•
Connect the 12V / 1A power adapter.
User manual
100-240VAC - 12V 1A (power adapter
included)
1.6 MPa
1/2", 3/4", 1"
5-10 s
30-40 kgf.cm
2.4GHz
100mW
3
English
Publicité
