Technical Specifications - Caterlite GH489 Mode D'emploi

Cleaning the Carriage and Food Grip
1. Disconnect the appliance from the power supply.
2. Lift the food grip from the cradle.
3. Tilt the cradle away from the appliance.
4. Wash with warm soapy water.
5. Dry thoroughly.
Cleaning / Changing the Blade
1. Disconnect the appliance from the power supply.
2. Push the carriage away from the blade.
3. Unscrew and remove the centre plastic cap securing the blade.
4. Carefully lift the blade from the appliance.
5. Wash the blade by wiping from the centre towards the edge.
6. Dry thoroughly.
7. Re-put the blade, ensuring the centre plastic cap is securely tightened.
Note: Caterlite recommend the use of cut-resistant or wire mesh gloves when
cleaning the blade.
Cleaning Behind the Blade
• With the blade removed use a slightly damp cloth to clean the area behind the blade.
• Dry thoroughly before replacing the blade.
Troubleshooting
Fault
The unit is not working
The cradle does not move
smoothly along the carriage

Technical Specifications

Model Voltage Power
GH489 230V 50Hz 200W
GH489_ML_A5_v5_20190704.indb 5
Probable Cause
The unit is not switched on
Plug and lead are damaged
Fuse in the plug has blown
Power supply
Internal wiring fault
Food trapped beneath cradle Tilt cradle and clean carriage
Slicing Blade
Current
Thickness Diameter
0.87A 1-15 mm 190mm
Solution
Check the unit is plugged in correctly and
switched on
Call Caterlite agent or qualified technician
Replace the plug fuse
Check power supply
Call Caterlite agent or qualified technician
Max.
Dimensions
Slicing
H x W x D mm
Width
175mm 270 x 362 x 245
UK
Weight
4.1kg
5
2019/7/4 11:51