Front Panel Controls - Cambridge Audio azur 340T Mode D'emploi

FRONT PANEL CONTROLS

1/6 2/7 3/8
Standby / On
Standby/On
Switches the 340T between Standby and On. When in Standby the front
panel display shows the current time in hours and minutes, as well as
the date if RDS clock mode is enabled.
Presets
The 340T can store up to 20 Presets for each of the FM and AM bands.
The Shift button alternates the 5 buttons between accessing Presets
1-5 and 6-10. To access Presets 11-20, hold down the Shift button. The
display will show which choice has been made.
FM/AM
This button switches between the FM and AM bands.
Stereo/Mono
Press this button to alternate between Stereo and Mono mode when
listening to FM broadcasts.
4/9 5/10 Shift
340T FM/AM tuner
FM/AM Stereo/Mono
Info
Allows the user to select and view different information on the display.
When listening to the FM band, the display modes are Radiotext, RDS
Program Type, Signal Strength, Time, Stereo/Mono mode, and Info Off.
In AM mode, the user can see the Signal Strength and Time. RDS
information on the FM band is dependant on signal strength.
Store/Mode
Press the Store/Mode button once and the tuner will show the next
available Preset. Use the |<< >>| buttons to change the Preset number
as required, and press Store again to save the Preset. Holding down
Store/Mode changes the operation of the |<< >>| buttons between
Scan and Preset mode.
<< >>
| |
Adjusts the tuner frequency when in Scan mode (the default setting).
Holding either button down will search for the next station. When in
Preset mode, the user can step through each of the stored Presets.
azur
340T
FM/AM Tuner
Info Store/Mode
Azur FM/AM tuner 7