Front Panel Controls - Cambridge Audio azur 640T Mode D'emploi

FRONT PANEL CONTROLS

Standby/On
Switches the 640T between Standby and On. When in Standby the front
panel display shows the current time in hours, minutes and seconds .
Presets
The 640T can store up to 10 presets for both FM and DAB.
The Shift button alternates the five buttons between accessing presets
1-5 and 6-10. The display will show which choice has been made.
DAB/FM
This button switches between the DAB and FM bands. The display will
show "Switching to ..."
Autotune
In DAB mode Autotune will scan the entire DAB band. The stations it has
found will be displayed in alphabetical order, shown as 'A-Z'.
In FM mode a brief press will scan up through all available stations.
Press and hold Autotune to scan down.
640T DAB/FM tuner
Info
Displays information such as time, date, music genre and programme
type.
RDS information on the FM band is dependant on signal strength.
Select
In DAB mode press to listen to selected station.
If you do not press Select the 640T will revert to showing the information
of the station playing before you started scanning through the station
list.
In FM mode press to switch between auto (normally stereo) and mono
transmission.
Step < < >
In DAB mode, press to scroll through available stations alphabetically.
In FM mode the Step button moves the frequency in .05mhz steps up or
down. Also used for Clock/Alarm/Sleep settings
azur DAB/FM tuner 7