Main Components; Technical Data - FAR FHU 05 Mode D'emploi

MAIN COMPONENTS

A) .........................................................................Cone holder
B) ............................................................Balancer connection
C) .................................................................................. Guard
D) ....................................................... Tensile strenght button
E) ........................................................................Oil tank plug
F) ................................................ Compressed air connection
G) .............................................................................. Ring nut
I) ................................................................ Protection bottom
G
A
W 17/32"-20
D
F
NOTE
Connect the riveting head to the FHU 05 device by means of the
holder cone (A) and fasten with the ring nut (G).
8
GB

TECHNICAL DATA

• Working preessure .....................................................6 BAR
• Min. int. diam. of the compressed
air feeding hose ...........................................ø min. = 8 mm
• Air consumption per cycle .......................................10,9 Nl
• Maximum force .........................................6 BAR - 22725 N
• Stroke ................................................................... 19,5 mm
• Weight .................................................................. 2,650 Kg
• Working temperature .............................................-5°/+50°
AIR FEED
The air feed must be free from foreign bodies and humidity in
order to protect the device from premature wear and tear of
the components in movement, therefore we suggest to use a
lubricator group for compressed air.
B
C
E
I
Date 01-2012
FHU 05
Revisione - 05