Publicité
1
Before you begin installing the fan, Switch
power off at Service panel and lock
service disconnecting means to prevent
power from being switched on
accidentally. When the service
disconnecting means cannot be locked,
securely fasten a warning device, such
as a tag, to the service panel.
4
Switch housing
Tap
Light fixture
Remove tap from bottom of switch housing.
Thread lead wires from light fixture through
central hole in switch housing and then
install switch housing onto light fixture by
turning clockwise till tight.
7
If wiring with plugs, connect the plug
from fan to the plug from light kit
assembly. Make sure the plugs are
clasped firmly.
Install light kit assembly (switch
housing) onto the fan with the set
screws removed in step 2.
Note
: There may be a light switch on
switch housing of some fans. Make
sure it is turned on.
© 2016 Monte Carlo Fan Company
GENERAL INSTALLATION
2
Switch
housing
Remove set screws from switch housing.
Keep screws.
Switch housing may be different than
shown.
5
Hex nut
Lock washer
Place lock washer and hex nut provided
over lead wires from light fixture and tighten
securely with the thread rod of light fixture.
8
Install 3 x 10-watt medium base enclosed
type of LED lamps.
Caution: Approved for use with LED light
bulb only
(MaxLiTe Model# E10A19DLED927/JA8,
dimmable). Do not use incandescent
light bulb.
Caution: Do not replace bulb until it cools
down.
3
3
Switch housing, plugs may be
different than shown
Unplug (If wiring with quick connectors)
and remove the switch housing from fan.
6
Connect white wire from light fixture
with white wire from fan and then
connect black (or blue) wire from light
fixture with blue (or black) wire from
fan.
9
Plate on
light fixture
Bulb
Final cap
Finial
Remove finial and final cap from light
fixture. Keep the parts.
Feed the fan pull chain through a hole in
the plate on the light fixture.
Note: Be sure pull chain for fan operation
does not rub against bulb during operation.
Show different type
of wiring
Pull chain from fan
12/2016
Publicité
