Publicité
REMOTE CONTROL
Mute
Mode key: (Choose from AUX/USB/TF/BLUETOOTH)
0-9 keys: Access directly the file number
ECHO + / ECHO -: Increases / reduces the echo effect on the microphone
AUX: Press to select AUX mode
EQ: Sound mode key (Choose from rock, pop, jazz and etc.)
BT: Press to select Bluetooth mode
PREVIOUS : Previous track
PAUSE/PLAY : Press to pause and resume play.
NEXT : Next track
TREBLE + / TREBLE -: Increases / reduces the high frequencies
MIC VOL + / MIC VOL -: Increases / reduces the volume of the connected mic
VOL+ / VOL-: Increase/reduce the overall volume
LIGHT SW: Press to cycle through the various light effects
BASS + / BASS -: Increases / reduces the low frequencies
M.TRE +/M.TRE+: Increases / reduces the high frequencies of the microphone
M.BASS +/M.BASS+: Increases / reduces the low frequencies of the microphone
MIC PRI: Press to reduce the volume of all other input sources while you are talking into the
microphone
REPEAT: Repeat one/all tracks.
REC: Press to record your voice on USB or TF
FOLDER: Press to select a folder on your USB or TF card that contains the songs you want to play
BLUETOOTH PAIRING PROCEDURE
•
Press MODE or BT button on the unit or the remote control until BT is displayed.
Put the cell phone within 3 meters
•
•
Activate the BT search function on your cell phone to search for the BT device. Please refer to the user manu-
al for details
•
Select STREET-WAVE in the list of found devices.
Shortly press the PLAY/PAUSE button ▶ to play or pause the music. Shortly press the " " or "" button to
•
select the previous or next track.
AUX MODE:
Press the MODE button on the unit until AUX is selected, or the AUX button on the remote control. Play the mu-
sic of the device connected to the AUX input.
USB MODE:
•
Press MODE to select "USB" and insert the USB device. The unit will automatically read and play the music in
the USB device.
•
Press "▶" button shortly to pause or play.
•
Shortly press "" button to go to the previous song.
Shortly press "" button to go to the next song.
•
Please note that the 2 USB inputs CANNOT be used at the same time. Unplug the USB device first before you connect another
USB device to the other input.
MICRO-SD MODE:
•
After start up, press MODE to select "SD" and insert the microSD card. The unit will automatically read and
play the music on the microSD card.
Press "▶‖ " key shortly to pause or play the music.
•
•
Shortly press "" key to skip to the previous track.
Shortly press "" key to skip to the next track.
•
TWS PAIRING MODE:
•
Make sure both speakers are OFF.
•
Go to your phone's Bluetooth interface and make sure that it is not connected to either of the speakers. If
your phone is connected, remove the speakers from the list of available devices.
•
Turn both speakers ON, press the MODE button on both speakers. The word « BLUE » should appear on both
4
MANUAL - STREET-WAVE
Code: 10-5538
Publicité
