-
Ensure the instatlation base is levelled and stable. Please make sure there is 0.6
m free space around the machine (see picture below-solid circle indicates the
radius of training area) and at least 0.5 m of free space on each side of the
machine (see picture below-dashed line indicates an additional free space.
-
WARNING ! Rhythm control systems heart rate may be inaccurate. Overtraining can lead
to serious injury or death. If you feel unwell, stop training immediately.
-
For totally safe use, a stable, level surface is required. Protect your floor covering with a
mat. Do not use the equipment in damp areas (swimming pool, sauna, etc.).
-
Do not allow children to play with this equipment. CARE declines all responsibility for any
injuries they may incur. Do not allow children close to this equipment when you are
training.
-
CARE declines all responsibility if technical modifications are made to any of its products
by the user.
-
Maximum weight of user: 100 kg.
-
Before you start training, it is essential that you consult your doctor to determine
the intensity level of the program you use.
-
CAUTION: The control systems of the
-
heart rate may be incorrect. Excessive exercise can cause serious injury
-
or cause death. If you feel any discomfort, stop the exercises immediately.
-
Excessive or badly programmed training can damage your health.
-
Keep your back straight when exercising.
-
It is strongly recommended that your wear suitable clothing and footwear.
Maintenance
-
Regularly check that elements fastened with nuts and bolts are correctly tightened.
-
To maintain the level of safety, the equipment must be regularly checked. It is vital that
any faulty parts are replaced and that it is not used until completely repaired. Remember
regularly to grease moving parts.
As sweat is very corrosive, do not allow it to come into contact with the enameled or
-
chromed parts of the equipment, particularly the computer. Immediately wipe the
equipment after training. The enameled parts can be cleaned using a damp sponge. All
aggressive or corrosive products should be avoided.
-
Poids unitaire : 16.5kg
-
Dimensions : 85×45×117cm (0.38m²)
-
The braking system is independent of speed
-
This class C crank training device is not suitable for high precision exercises
4