Publicité
ASSEMBLY & ADJUSTMENTS
ADJUSTING THE LIGHTING PANELS (FIG 2)
Each of the three light panels can pivot 180° and rotate
270°, as shown in FIG 2-E. This functionality allows precise
adjustment of the light panels to achieve the optimal
lighting angle and position.
OPERATION
CHARGING THE LIGHT
This light is powered by internal rechargeable lithium-ion
batteries and needs to be charged when the battery power
is low. Follow the steps below to charge the light:
1. Make sure the light is turned Off.
2. Lift the rubber cover (7) to access the charging port.
3. Insert the small USB-C end of the charging cable into the
USB-C charging port (6), and connect the USB end to a
standard 5V USB power source.
4. The battery power Indicator lights (4) will illuminate
to display the battery power level. One of the indicator
lights will flash if charging is in progress.
5. When charging is complete, all four indicator lights will
remain solid.
NOTE:
It takes approximately 4.5 hours to fully charge a
depleted light.
SWITCH BUTTONS
There are two switch buttons: the On/Off Switch Button (2)
and the Mode Switch Button (3). Refer to FIG 1.
Press the On/Off Switch Button to turn the light On or Off.
The light will turn on in the last mode used before it was
turned off.
When the light is On, press the Mode Switch Button to
cycle through the light brightness settings in the following
sequence. High - Medium - Low.
NOTE:
When connected to a USB power source and turned
on, the light operates in a single mode with a brightness
range of 500 to 1500 lumens, depending on the remaining
battery power level. This allows a continuous lighting option
for the user.
BATTERY POWER INDICATOR
This light features a battery power indicator (4). It consists
of four lights. To indicate the battery power level, power
the light On. More illuminated lights indicate more battery
power remaining.
USB POWER OUTPUT
This light has a USB power output (5) to charge other
portable devices using the appropriate USB cable.
MAGNETIC BASE
The light head is equipped with a magnetic base that
includes three magnetic feet (13), allowing it to be attached
to ferrous metal surfaces.
HANGING HOOK
The light head features a foldable, rotatable hook (11) on
the base for easy hanging. Refer to FIG 1.
English
WARNING:
unplugged and completely cool before attempting to
clean it.
Your light requires very little care and maintenance. Simply
clean the lens regularly with a non-abrasive cleaner.
This product is warranted free from defects in material and
workmanship for 5 (Five) years after date of purchase. This
limited warranty does not cover normal wear and tear or
damage from neglect or accident. The original purchaser is
covered by this warranty and it is not transferable. Prior to
returning your product to store location of purchase, please
call the Toll-Free Help Line for possible solutions.
For questions about this or any other PowerSmith™
product,
Please call Toll-Free: 888-552-8665.
Or visit our website:
www.powersmithproducts.com
©Richpower Industries, Inc. All Rights reserved
Printed in China, on recycled paper
4
MAINTENANCE
Always make sure the light is
WARRANTY
HELP LINE
Richpower Industries, Inc.
736 Hampton Road
Williamston, SC 29697
Publicité
