Publicité
PRODUCT OVERVIEW
REFER TO FIG 1
1.
Lighting Panels
2.
On/Off Switch Button
3.
Mode Switch Button
4.
Battery Power Indicator
5.
USB Power Output
6.
USB-C Charging Port
7.
USB Port Cover
SPECIFICATIONS
Brightness on Battery Power..
Runtime per Charge ..............
Brightness on USB Power .....
Color Temperature ................
Battery .................................
Recharge Time .....................
USB Power Output ................
Tripod Height ........................
Net Weight ............................
UNPACKING CONTENTS
Important!
Due to modern mass production
techniques, it is unlikely the product is faulty or that a
part is missing. If you find anything wrong, do not operate
the product until the parts have been replaced or the fault
has been rectified. Failure to do so could result in serious
personal injury.
CONTENTS IN PACKAGE
Description
Light Head
Tripod
10' USB-C Charging Cable
Manual
IMPORTANT SAFETY INSTRUCTIONS
READ AND UNDERSTAND ALL WARNINGS, CAUTIONS
AND OPERATING INSTRUCTIONS BEFORE USING THIS
EQUIPMENT. Failure to follow all instructions listed below
may result in electric shock, fire and/or serious personal
injury.
Always unplug the charger/adaptor from the light
•
and power source when not in use.
Do not look directly at the lighted lamps to avoid eye
•
injuries.
Always keep the work light away from any flammable
•
surface or materials.
Always check damaged or worn-out parts before
•
using the work light. Broken parts will affect the work
light operation. Replace or repair damaged or worn parts
immediately. If repairs are needed, consult a professional
electrician.
Do not use a pressure washer to clean this product.
•
Do not modify the work light in any way. Unauthorized
•
modification may impair the function and/or safety and
could affect the life of the product. There are specific
applications for which the work light was designed.
8.
Tripod
9.
Tripod Twist Locks
10.
Tripod Leg Release Button
11.
Hanging Hook
12.
1/4" Threaded Fitting
13.
Magnets
14.
USB-C Charging Cable
4500/2500/1200 Lumens
1.5/3/6 Hours
1500 Lumens Max.
5000K Bright White
7.3V, Lithium-Ion, 4.0 Ah
4-5 Hours
5V, 2A
23.5" - 58.5"
5.3 lb.
Quantity
1
1
1
1
English
IMPORTANT SAFETY INSTRUCTIONS
Store work light in a secure place out of the reach of
•
children. Inspect it for good working condition prior to
storage and before re-use.
WARNING:
a Lithium-ion battery. Lithium-ion batteries are small,
compact, and ideal for providing long-lasting power to
this product. However, they must be used and charged
properly. Improper use can result in serious injury, fire,
or death.
CAUTION:
installed internally. Do not attempt to remove the battery
from the product.
Do not place this lithium-ion battery-powered product in
•
fire or apply heat to it.
Do not apply strong impact or shocks to this lithium-ion
•
battery-powered product.
Do not allow the lithium-ion battery to get wet.
•
Do not leave this lithium-ion battery-powered product in
•
the direct sunlight, or use or store it inside cars in hot
weather. Doing so may cause the battery to generate
heat, rupture, or ignite. Using the battery in this manner
may also result in a loss of performance and a shortened
battery life.
NEVER THROW WATER ON A BURNING LITHIUM-ION
•
BATTERY! If a lithium-ion battery does catch on fire, it
will burn even more violently when contacted with water.
Store the product at temperatures between 41°F and
•
77°F (5°C and 25°C).
Properly dispose of all batteries at a recycling center
•
or per local code. More information regarding battery
disposal in U.S. and Canada is available at; http://www.
rbrc.org/index.html, or by calling 1-800-822-8837
(1-800-8BATTER).
ASSEMBLY & ADJUSTMENTS
ATTACHING LIGHT HEAD TO THE TRIPOD (FIG 2)
The light head and tripod are shipped separately in the
package. To assemble, align the bolt on the top of the tripod
with the threaded fitting (12) located at the center of the
light head's base. Securely fasten by screwing the bolt into
the threaded fitting, as illustrated in FIG 2 A-B.
ADJUSTING THE TRIPOD (FIG 2)
Extending the Tripod: Refer to FIG 2 B-C-D
1.
Push the tripod leg release button (10) to disengage the
leg lock.
2.
Fully deploy all three tripod legs and ensure they are
positioned on a stable, flat surface.
3.
Adjust the tripod height by loosening the twist locks (9)
and extending the center poles. Once the desired height
is reached, securely tighten the twist locks.
NOTE:
The maximum height of the tripod is 58.5".
Folding the Tripod for Storage or Transportation:
1.
Loosen the twist locks (9) and retract the center poles
to the lowest position. Tighten the twist locks to secure
the collapsed height.
2.
Fold all three legs inward towards the center until you
hear the locking clicks.
3
This LED light is powered by
This product comes with a battery
Publicité
