When The Oven Is Working; Interrupting A Cooking Cycle; Altering Parameters; Cancelling A Cooking Cycle - Blomberg BKE 9270 X Mode D'emploi

When the oven is working...

Interrupting a cooking cycle

You can stop the cooking process at any time by
pressing the Start/Stop key once or by opening
the oven door.
In both cases:
Microwave emission
immediately.
The grill is de-activated but is still very hot.
Danger of burning!
The timer stops and the display shows the
remaining amount of operating time.
If you wish, at this time you can:
1. Turn or stir the food to ensure it will be
evenly cooked.
2. Change the process parameters.
3. Cancel the
Start/Stop key.
To restart the process, close the door and press
the Start/Stop key

Altering parameters

The operating parameters (time, weight, power,
etc.) can be altered when the oven is operating or
when the cooking process has been interrupted
by proceeding as follows:
1. To alter the time, turn the rotating knob. The
new time defined is immediately valid.
2. To alter the power, press the Weight/Power
Selection key. The respective light start to
flash. Alter the parameter by pressing the "-
"and "+"keys and confirm by pressing the
Power Selection key again.
is
process by pressing

Cancelling a cooking cycle

If you wish to cancel the cooking process, press
the Start/Stop key for 3 seconds.
You will then hear a beep and the time will appear
on the display.
stopped

End of a cooking cycle

At the end of the process you will hear three
beeps and the display will show the word "End".
The beeps are repeated every 30 seconds until
the door is opened or the Start/Stop key is
pressed.
the
EN
50