Publicité
c) Assembling the wall-mounted dock
Unit: mm
1. Place the dock against the wall where it is to be installed,
ensuring it is correctly positioned.
2. Use a pencil to mark the location of the two screw-holes at the
top and bottom of the dock.
3. Remove the dock from the wall and drill two holes, in accordance
with the markings.
4. Insert the supplied wall anchors into two holes.
5. Hold the dock in position and thread the supplied screws through
the top and bottom holes of the dock and into both wall anchors.
6. Tighten the screws to secure the dock in place.
The wall-mounted dock can hang up the vacuum
cleaner and cleaning accessories to save your space.
Warning
Please make sure there is no gas, water
or electrical cables and wires behind the
mounting area.
39
Publicité
