Publicité
Installation Instructions
Installation
1-5
Using a trim tool, remove the side cover of the lower dash
console
1-7
Pull lower dash console rearward to disengage all clips
Disconnect all connections from switch panel
Release pre-wired connector
Description
2020 Legacy Fog Lamp Kit
Part Number: H451SAN000
Description: Fog Light Kit, Legacy
1-6
Remove two (2) philips head screws
1-8
Using a flat bladed screw driver, release the top and
bottom tabs of the right most switch blank.
Issue
Date
1
4/3/2019
Screw Locations
Subaru of America
Locking tabs
Page
3 / 4
Publicité
