Changing The Air Filter - Hendi T-REX Mode D'emploi

SPINDLE CLEANING FUNCTION:
EN

CHANGING THE AIR FILTER

ANOMALIES AND REPAIR
• If a fault occurs, call the customer hotline indicat-
ed in the warranty. Do not attempt to dismantle or
repair it, as this may be dangerous.
• If the connection to the mains has been damaged,
8
• Fit the jar with the empty vessel into the machine.
Press the "CLEANING" button
• The screen will display the message "Cleaning
Wait" and the spindle will lower.
• When the spindle reaches the bottom, the screen
will display the message "Cleaning Remove the JAR"
• Move the machine forward (Fig.7).
• Remove the drip tray (C)
• Remove the jar and the spindle will come into view
(Fig.8).
Fig. 7 • Clean the spindle with a damp cloth.
• When the jar is positioned, the machine will return
to the start setting.
Fig. 8
• This machine has an active carbonium filter in its
air inlet (Fig.9).
• It is used to purify the air injected into the ice-
cream by eliminating oil vapours, flavours and
odours.
• To change the filter, open the back of the machine,
remove the used filter and fit the new one.
• We recommend changing the filter every 4 or 6
months.
Fig. 9
it must be replaced and you should proceed as you
would in the case of damage.
• If any anomaly is detected, check the following table: