Cancel Function - Hendi T-REX Mode D'emploi

USE:
EN
DOUBLE PROCESSING FUNCTION:
• The double processing function enables you to
make a second pass of the blades through the
processed ice-cream, in order to obtain optimum
textures in ice-creams that are very cold or have a
high water content. To do this, press the button

CANCEL FUNCTION:

• The cancel function enables you to interrupt the
running of the appliance. To do so, press the but-
ton corresponding to this function (A7). The
screen will display the message "Starting", the
machine will return to its initial position and the
6
T-REX
Fig. 4
P R O F E S S I O N A L
Fig. 5
• Unroll the cable completely before plugging it in.
• Connect the appliance to the mains.
• Turn the appliance on using the on/off switch.
• The message "Awaiting JAR" will appear in the
screen (Fig. 4).For safety reasons, the machine will
not function if the jar is not in place.
• Fit the blade (E) onto the spindle of the lid (D), and
ensure that it is correctly secured (Fig. 5)
• Place the vessel (F) into the jar (G)
• Place the jar in the machine with the handle to the
user's right-hand-side (Fig. 2)
• Couple the jar by turning it 90º clockwise. When it
reaches the correct position you will hear 2 clicks
(Fig. 3)
• The screen will display the message "Insert POR-
TION: 0"
• Select the portion you wish to process, between
1 and 10, by using the "+" button to increase the
portion (A2) and the "-" button to reduce it (A5)
• The "STOP / DELETE" button sets the counter to 0 (A7)
• Press the "START" button to begin the processing.
(A6)
• The screen will display the portions requested,
those processed and an arrow indicating whether
the machine is raising or lowering.
• When the process is complete, you will hear an
acoustic signal and the screen will be lit in green,
indicating the portions that have been processed
and those remaining unprocessed in the vessel.
• In some preparations, pressure may remain in the
jar (G). We recommend pressing the decompres-
sion button (K) to allow the jar to be removed (G).
corresponding to this function (A3).
• The screen will show the message "2P" beside the
selected portions. The machine will perform this
function on the selected portions when the
"START" button has been pressed.
screen will display the message "Insert Portion: 0"
when the machine is ready to process once more.
• When the machine has reached the start, we rec-
ommend checking that the blade is well secured
before beginning a new processing.