Publicité
E-LOCK SECURITY CODE SETUP (continued)
Note: Do not shut the safe door until you have confirmed your new security code at least
3 times to ensure your code has been saved and you can open the door succesfully. If the
code fails, the yellow light (right) will flash & beep. Repeat the steps above until succesful.
Warning: If the incorrect security code is entered 3 times you will have an automatic
lockout for 20 seconds before you can enter your code again. If 3 additional failed
attemps are made, the keypad will lockout for 10 minutes. Leave batteries in to go
through lockout cycle. if batteries are removed timer will restart at zero
7. LOCKED OUT OF YOUR SAFE
In the event you have forgotten the security code your primary action will be to use
your backup keys in order to gain access to your safe and follow the E-Lock Security
Setup Code instructions, starting at step 2 of activating the brass reset button.
If you have lost your backup keys, you will need to contact customer service at the
number below. Proof of purchase is required to obtain keys.
Contact Customer Service at cs@saproducts.com or +1 (888) 792-4264
8. E-LOCK QUIET MODE
To mute the E-Lock, enter the code [ * 6 3 3 ] .
1.
To turn the sound back on, enter code [ * 6 6 ]
2.
By activating the E-lock quiet mode, the safe will no longer
make audible sound when interacting with safe, allow for
silent access.
.
8
Publicité
