Publicité
cause immediately. In
general, vibrations are a sign
Emptying the collection bag
Empty the collection bag (11) when it is half full. In
this way, the suction capacity remains effective.
▪ Switch off the tool and remove the battery (14).
▪ Unzip the bottom of the collection bag and empty
it.
▪ Close the zipper completely.
CLEANING AND MAINTENANCE
Remove the battery pack
before starting any ad-
justment, cleaning and
maintenance work on the
device. Wait until all rotating
and the appliance has cooled
• Maintain the machine and in particular the
openings
clean ventilation.
• Never spray water on the device!
• Do not clean the device and dry components with
solvents and flammable or toxic liquids.
• Use only a damp cloth, ensuring that the plug is
disconnected from the electrical outlet first.
• To permanently maintain performance
optimal, the collection bag must be emptied
regularly.
• Before each start-up, check all the
screwed and built-in connections, as well as the
protective devices, the correct fixing as well as the
good functioning of all moving parts.
• Use only original accessories and spare parts. The
use of other spare parts may cause
accidents/injuries to the user. In this case, the
manufacturer declines all responsibility.
• If you need accessories or spare parts, please
contact our service department.
• Only a regularly maintained and repaired device
can give satisfaction. Insufficient maintenance can
lead to accidents and injuries.
• Repairs and work not described in this manual
must only be carried out by authorized qualified
personnel.
In order to maintain battery capacity, we
recommend discharging
fully charge the battery once a month and then fully
charge it. Storage of the blower should only be done
when the battery is fully charged.
Store the blower in a dry place protected from frost;
the temperature should not exceed 40°C.
of trouble.
DANGER
parts have stopped
down.
TECHNICAL DATA
Rated voltage
Rotation speed
Turbo Mode
Max speed air flow
Airflow Turbo Mode
Maximum suction capacity
Maximum Suction Turbo Mode
Collection bag capacity
Max grinding ratio
Weight
Noise emission values measured according to
relevant standard.
Blower mode
L
81.5 dB(A)
PA
L
94 dB(A)
WA
Vacuum mode
L
83.1 dB(A)
PA
L
99 dB(A)
WA
Guaranteed sound power level
The sound power pressure may
exceed 85 dB(A), in this case
individual hearing protection
Weighted root mean square acceleration according
to relevant standard. :
Blower mode : , a
= 1.544 k=1.5m/s
h
Vacuum mode :a
= 1.940 k=1.5m/s
h
The declared vibration total value has
been measured in accordance with a standard
test method and may be used for comparing one
tool with another that the declared vibration total
value may also be used in a preliminary
assessment of exposure.
A warning that the vibration emission
during actual use of the power tool can differ
from the declared total value depending on the
ways in which the tool is used and of the need to
identify safety measures to protect the operator
that are based on an estimation of exposure in
the actual conditions of use (taking account of
all parts of the operating cycle such as the times
when the tool is switched off and when it is
running idle in addition to the trigger time).
40 V Max.
2x20V .Max.
4500-14000 min
-1
17000 min
-1
205km/h
245km/h
510m³/h
630m³/h
45L
15:1
3kg
K = 3 dB(A)
K = 2.27 dB(A)
K = 3 dB(A)
K = 2.24 dB(A)
L
101 dB(A)
WA
ATTENTION !
must be worn.
2
2
32
Publicité
