Publicité
Detach the guide comb from the cutting head after each use.
Clean the guide comb with clean water and dry it afterwards. Ensure the guide comb is
completely dry before attaching it again to the cutting head and using the appliance again.
MAINTENANCE & TROUBLE SHOOTING
This appliance is designed for household use and requires minimal
If the appliance malfunctions, switch it off and allow it to cool down, and contact your
place of purchase for advice.
DO NOT attempt to repair the appliance yourself.
This appliance has no user-serviceable parts.
LUBRICATING THE BLADES:
For an optimal performance, apply the lubrification oil that comes with the device on the
cutting blades every few haircuts.
WARNING! DO NOT use too much oil! Excessive oil will damage the motor if it seeps inside it.
STORAGE
When not in use, switch off the device. Allow the appliance to cool down completely and then
store it out of the reach of children in a dry location.
To oil it properly, the unit should be held so the blades are in a
downward position, add the oil as the arrow indication. Apply one or
two drops of lubrification oil on the base of the moving blades.
Clean any excess oil with absorbent paper.
care after purchasing.
Publicité
