Publicité
To prevent hair clippings from falling down the collar place a towel or cape around the throat
and neck.
Hold the hair clipper in a comfortable grip. Now you are ready to cut! If you are not used to
cutting hair, begin with the guide comb for a longer hair length and then reduce it, to avoid
cutting more hair than desired.
When using the appliance for the first time, first try it on an area with light hair growth.
Use a slow and controlled movement. DO NOT force the appliance through the hair faster than
it can cut it. To control the result during cutting, regularly comb the hair in the desired style.
During the operation, shake or blow off the hair from the cutting head and guide comb, if too
much hair is caught in.
CUTTING THE HAIR
Comb the hair thoroughly to detangle it completely. To avoid jamming the blades, comb
the hair in the direction in which it grows, and make sure to remove all tangles.
Hold the hair clipper with the comb teeth up, but with the bottom of the guide comb flat
against the head.
Start cutting the hair from the lower side to the upper side of the head. Slowly lift the hair
clipper up and outward through the hair, cutting only a small amount at a time.
Repeat this procedure at the back of the head.
TRIMMING NECKLINE AND EAR AREA
WARNING! RISK OF INJURY!
Be aware that the blades on the cutting head are very sharp, which
remove any hair they come into contact with when the guide comb is removed.
Position the appliance so that only one edge contacts the hair. Slowly shape the hair around
the ears and trim the neckline by positioning the blades against the neck and moving
downwards. For final trimming, use suitable scissors (not included).
After use, press the ON/OFF button to switch off the appliance.
CARE AND CLEANING
IMPORTANT: ALWAYS ensure that the hair clipper is switched off after use and allow it to cool
down before cleaning.
This appliance is suitable for cleaning under an open water tap.
Publicité
