Publicité
2. Guide the assembled fastening plates
with the plastic screws
sidewards into the corresponding holder on the
toilet set
(see Fig. B).
6
3. Insert the plastic screws
seat
into the drilled holes in the ceramic from
6
above (see Fig. C).
4. Adjust both fastening plates
ing pins on both sides. Put down the toilet seat
and adjust it. When adjusting, ensure that the
toilet seat
is positioned centrally on the ce-
6
ramic (see Fig. D).
5. Make sure that there's no gap between the hinge
and the toilet seat
6
lie flush on the ceramic (see Fig. E).
6. Screw the plastic rings
from below over the plastic screws
5
tighten them (see Fig. F).
Make certain that the toilet seat
position before using it for the first time.
Use
Please read the following notices for a long service
life and proper application of the product:
Do not sit or stand on the lid of the toilet seat
Do not open the seat lid further than shown in
Figure G.
At regular intervals, check that the toilet seat
is positioned correctly and securely. Make read-
justments where necessary.
Cleaning and care
Do not use aggressive or corrosive cleaning
agents, as these could damage the product.
Clean the product regularly with a damp cloth
and a standard bathroom cleaner. Afterwards,
dry the product with a soft cloth.
6
GB/IE/NI
along
1
and the washers
2
3
, along with the toilet
2
with the fasten-
1
. The toilet seat
should
6
and the plastic nuts
4
, then
2
is fixed into
6
6
Disposal
The packaging is made entirely of recyclable mate-
rials, which you may dispose of at local recycling
facilities.
Contact your local refuse disposal authority for more
details of how to dispose of your worn-out product.
6
Warranty
The product has been manufactured to strict quality
guidelines and meticulously examined before delivery.
In the event of material or manufacturing defects you
have legal rights against the retailer of this product.
Your legal rights are not limited in any way by our
warranty detailed below.
The warranty for this product is 3 years from the date
of purchase. The warranty period begins on the date
of purchase. Keep the original sales receipt in a safe
location as this document is required as proof of
purchase.
Any damage or defects already present at the time
of purchase must be reported without delay after
.
unpacking the product.
Should the product show any fault in materials or
manufacture within 3 years from the date of pur-
6
chase, we will repair or replace it – at our choice
– free of charge to you. The warranty period is not
extended as a result of a claim being granted. This
also applies to replaced and repaired parts.
This warranty becomes void if the product has been
damaged, or used or maintained improperly.
The warranty covers material or manufacturing de-
fects. This warranty does not cover product parts
subject to normal wear and tear, thus considered
consumables (e.g. batteries, rechargeable batteries,
tubes, cartridges), nor damage to fragile parts, e.g.
switches or glass parts.
Publicité
