Publicité
- EASY IRON
(only available on certain models)
This function allows you to minimizes
creases as much as possible, eliminating
the intermediate spins or
intensity of the last one.
- STEAM
(only available on certain models)
l
By this option you can add a specific
steam treatment to some washing cycles
(see programme table).
l
The steam function relaxes the folds and
makes ironing times shorter.
l
Fibres are regenerated and refreshed,
removing all smells from the items.
l
A dedicated steam treatment was devised
for
each
programme,
washing top efficiency depending on item
fabrics and colours.
If an option is selected that is not
compatible
with
programme then the option indicator
light first flashes and then goes off.
RAPID / STAIN LEVEL button
This button allows you to choose between
two different options, depending on the
selected programme.
- RAPID
The
button
becomes
you
select
the
programme on the knob and allows you to
select one of three durations indicated.
- STAIN LEVEL
l
Once the programme has been selected
the wash time set for that programme will
be automatically shown.
l
This option allows you to choose between
3 levels of wash intensity modifying the
length of the programme, depending on
reducing the
to
guarantee
the
selected
active
when
RAPID
(14'-30'-44')
how much the fabrics are soiled (can only
be used on some programmes as shown
in the table of programmes).
TEMPERATURE SELECTION
button
l
This button allows you to change the
temperature of the wash cycles.
l
It is not possible to raise the temperature
over the maximum allowed for the
programme, in order to protect the
fabrics.
l
If you want carry out a cold wash all the
indicators must be off.
SPIN SPEED button
l
By pressing this button, it is possible to
reduce the maximum speed, and if you
wish, the spin cycle can be cancelled.
l
If the label does not indicate specific
information, it is possible to use the
maximum spin expected in the program.
To prevent damage to the fabrics, it is
not possible to increase the speed
over the maximum allowed for the
programme.
l
To reactivate the spin cycle press the
button until you reach the spin speed you
would like to set.
l
It is possible to modify the spin speed
without pausing the machine.
An over dosing of detergent can
cause
excessive
appliance detects the presence of
excessive foam, it may exclude the
spinning phase or extend the duration
of the program and increase water
consumption.
69
foaming.
If
the
Publicité
