Publicité
3.
Unscrew the bottom hinge and the left levelling foot. Attach the hinge cover to the left side and the
levelling foot to the right side of the refrigerator.
! Attention: the inclination of the refrigerator must be less than 45° so that the compressor oil does not
enter the cooling circuit. If you do shut down the unit completely, wait 8 hours before turning it back on.
4.
Unscrew the door stopper at the bottom of the freezer door and move it to the other side. Remove
the hinge pin holder from the top of the door and move it to the other side.
5.
Refit the lower door to the appliance. Attach the middle hinge.
6.
Unscrew the door stopper at the bottom of the refrigerator door. Take the replacement door stopper
out of the packaging and attach this new door stopper to the other side of the door. Remove the
hinge pin holder at the top of the door and move it to the other side.
58
DO91335C
Publicité
