Publicité
3. Comissioning
On/Off Press the Powerbutton three times (fast) to turn the device on/ off. Choose between N (Normal-Mode) or T (Timed-Mode) by pressing the Minus- or
Plus-button. To confirm, press the Powerbutton. As a result the vaporizer will heat up. On Normal-Mode (N) you adjust the temperature manually. On
Timed-Mode (T) you adjust the start- and end- temperature as well as the duration of the session. The device has a built in safety duration of five minutes. If
the device has been inactive for this period of time, it automatically goes to standby. To reactivate the device, simply press and hold the power button for
three seconds.
Alternate between Celsius and Fahrenheit + and - Keep the button pressed until the temperature changes.
On Normal-Mode (N) you adjust the temperature manually with the plus- and minus-button. After the temperature is set the vaporizer will heat up. You
can subsequently adjust the temperature.
On Timed-Mode (T) you adjust the start-temperature with the plus- and minus-button and press the Powerbutton to confirm. After that you adjust the
start-temperature via plus- and minus-button and press the Powerbutton to confirm. In the end you adjust the duration of the session (in minutes) with the
plus- and minus-button and confirm by pressing the Powerbutton. Afterwards the device heats up to the start-temperature and heats up during the
duration of the session to the end temperature. Throughout the heating process a heating symbol blinks in the right bottom corner of the display. When
the desired temperature is reached the symbol stops blinking. The device has a built in safety duration of five minutes. If the device has been inactive for
this period of time, it goes to standby. To reactivate the device, simply press and hold the Powerbutton for three seconds. The device is equipped with a
temperature memory feature; it will immediately start heating up to the temperature that was last selected.
4. Cleaning
The mouthpiece can be cleaned with alcohol. Let the mouthpiece dry completely before reattaching it to the base and battery. Unscrew the filter screen
from the mouthpiece to clean or replace it. The heating chamber can be cleaned using the included brush tool. Do not use any liquid to clean the heating
chamber!
5. Warnings
Do not over pack the heating chamber / wax cup as this reduces airflow and can damage the device. Do not immerse the device in liquid of any kind this
can damage the heating element, and potentially harm the device. Do not modify the device in any way, doing so will void the warranty. Do not leave the
device unattended while using or charging. Do not charge/ store the device near a fire source or an extremely hot environment. If the device is damaged a
safe use is not guaranteed any more.
6. Warranty
The warranty covers all electronic components within the first year after purchase. Any defects created by misuse oder improper use of the device are
excluded from the warranty.
Publicité
