Publicité
Stilus Pro Konduktion/ Konvektion Vaporizer:
Accessories:
1x Vaporizer
1x Cleaning kit
5x Stainless steel screen
1x Micro USB Cable
1. Charging the device
The battery has to be located inside the device (positive terminal, smaller contact surface upwards). Subsequently, you have to plug the Micro USB cable in
a suitable power source and the charging connector in a charging port that is located on the side of the device.
During charging process the display shows a battery level indicator. It is possible to charge the removable battery outside the device with a separate
charger (not included).
Note: Choose correct battery compartment to attach it to the device.
In order to ensure the maximum lifetime of the battery, it is highly recommended to completely charge the device before its first use. Do not leave the
device unattended while being used or charging! Discharge current of replacement batteries should not be lower than 20A, otherwise warranty of the
device is void.
2. Loading the heating chamber
Detach mouthpiece to reveal a heating chamber and place one of the filter screens at thebottom of the heating chamber. Load your crushed herbs into
the chamber then reattach the mouthpiece to the device.
Publicité
