Ryobi OBC1820B Mode D'emploi page 7

stock is encountered, this practice could
minimise the blade thrust reaction. Both hands
must be used at all times to control the product.
■ Injuries may be caused, or aggravated, by
prolonged use of the product. When using
any product for prolonged periods, ensure
to take regular breaks.
ADDITIONAL BATTERY SAFETY
WARNINGS
WARNING! To reduce the risk of fi re,
personal injury, and product damage due to a
short circuit, never immerse the tool, battery
pack, or charger in fl uid or allow fl uid to fl ow
inside them. Corrosive or conductive fl uids,
such as seawater, certain industrial chemicals,
and bleach or bleach-containing products, etc.,
can cause a short circuit.
TRANSPORTATION AND STORAGE
■ Turn off the product, remove the battery
pack, and allow both to cool down before
storing or transporting.
■ Remove all foreign material from the product.
■ Do not store or transport the product with
the battery pack fitted. Remove the battery
pack, and secure it separately. Store the
product in a cool, dry, and well-ventilated
place that is inaccessible to children. Keep
the product away from corrosive agents,
such as garden chemicals and de-icing
salts. Do not store the product outdoors.
■ If a cutting blade is fitted, cover it with the
blade protector.
■ For transportation in vehicles, secure the
product against movement or falling to prevent
injury to persons or damage to the product.
TRANSPORTING LITHIUM BATTERIES
Transport the battery pack in accordance with
local and national provisions and regulations.
Follow all special requirements on packaging
and labelling when transporting batteries by a
third party. Ensure that no batteries can come
in contact with other batteries or conductive
materials while in transport by protecting
exposed connectors with insulating, non-
conductive caps or tape. Do not transport
batteries that are cracked or leaking. Check
with the forwarding company for further advice.
MAINTENANCE
■ Use only original
replacement parts,
attachments. Failure to do so can cause
possible injury, can contribute to poor
performance, and may void your warranty.
■ Servicing requires
knowledge and should be performed only
be a qualified service technician. Have the
product serviced by an authorised service
centre only.
■ Turn off the product and remove the battery
pack before conducting any maintenance or
cleaning work.
■ You may only make adjustments and repairs
described in this manual. For other repairs,
contact an authorised service centre.
■ For the replacement line, use only a nylon
filament line of the diameter described in
the specifications table of this manual.
■ After extending the new cutter line, always
return the product to its normal operating
position before starting.
■ After each use, clean the product with a
soft, dry cloth. Any part that is damaged
should be properly repaired or replaced by
an authorised service centre.
■ Check all nuts, bolts, and screws at frequent
intervals for proper tightness to ensure that
the product is in safe working condition. Any
part that is damaged should be properly
repaired or replaced by an authorised
service centre.
■ Bring the product to an authorised service
centre to replace damaged or unreadable
labels.
KNOW YOUR PRODUCT
See page 173.
1. Bike handle
2. Upper shaft
3. Lower shaft
4. Lock-out trigger
5. On/Off trigger
6. Cut-off blade
7. Harness
8. Grass deflector
9. TRI-ARC blade
10. Blade protector
11. Blade guard
12. Spool retainer
13. Spool
manufacturer's
accessories, and
extreme care and
7
Original Instructions
EN
FR
DE
ES
IT
NL
PT
DA
SV
FI
NO
RU
PL
CS
HU
RO
LV
LT
ET
HR
SL
SK
BG
UK
TR