Publicité
With the display on (ON) and the suction off (OFF), press simultaneously the buttons T8 and T9 for more than 3
seconds; the button T9 lights on with steady light for approx. 5 seconds, to indicate the activation.
To disable it, repeat the operation; the button T9 will flash for approx. 5 seconds to indicate the disabling.
Setting of Automatic Operation parameters
For correct use of the automatic operation, perform "Hood Calibration" and "Selection of the hob".
Hood Calibration
With the display on (ON) and the suction off (OFF), press button T4 for 5 seconds.
The suction speed (power) 2 starts functioning and button T4 flashes to indicate that hood calibration is initiated and it will
last for approx. 15 minutes.
Note: to interrupt the calibration, press T4 for 5 seconds; the calibration will be invalidated and should therefore be repeated.
Selection of the cooktop
With the display on (ON) and the suction off (OFF), press button T3 for 5 seconds.
Buttons T3, T5 and T6 light up.
Press the button T5 for the gas cooktop – the button flashes to indicate its selection.
Press the button T6 for the electric cooktop- the button flashes to indicate its selection.
30
Publicité
