Publicité
Operation
Connect the polarized plug to a standard 110/120 V wall receptacle.
Turn the switch once to turn the light on low.
Turn the switch again to cycle through the settings. The following is the switch sequence.
Care and cleaning
EXTERIOR MAINTENANCE
Disconnect fixture's plug from wall
receptacle.
Use a dry or slightly dampened clean cloth
and wipe the surface of the fixture.
Troubleshooting
Problem
The light will not turn on.
All manuals and user guides at all-guides.com
OFF
LOW
MED
NOTE: Do not use any cleaners with chemicals,
solvents, or harsh abrasives. Use only a dry
soft cloth to dust or wipe carefully.
Solution
Turn on switch or circuit breaker.
Plug the fixture in.
Tighten the light bulb in the socket.
Replace the light bulb.
7
Please contact 1-855-HD-HAMPTON for further assistance.
HIGH
HAMPTONBAY.COM
Publicité
