Publicité
Installation
1
Attaching the mounting bracket
Place the mounting bracket (EE) onto the
desired location and mark the location of
the mounting holes.
Remove the mounting bracket (EE), drill
appropriately sized holes at the marked
wall locations, and insert wall anchors (DD)
into the wall holes.
Replace the mounting bracket (EE) onto
the desired location.
Feed the mounting screws (CC) through
the mounting holes of the mounting
bracket (EE) and thread them into the wall
anchors (DD).
Tighten the mounting screws (CC) until the
mounting bracket (EE) is securely flush
against the wall.
2
Mounting the fixture
Place the main fixture body (C) over the
mounting bracket (EE).
Make sure the fixture screws on the
mounting bracket (EE) feed through the
mounting holes of the main fixture body (C).
Thread the lock nuts (BB) onto the fixture
screws until the main fixture body (C) is
securely flush against the wall.
All manuals and user guides at all-guides.com
EE
DD
5
Please contact 1-855-HD-HAMPTON for further assistance.
EE
DD
C
HAMPTONBAY.COM
CC
BB
D
Publicité
