Scandika LITEN Instructions De Montage Et Mode D'emploi page 19

Step 4
Connect the lower sensor wire (12) to the console.
Fix the console (04) to the holder on top of the
front stabilizer (02).
Step 5
If you prefer putting the console somewhere else...
1. Use the middle part of the sensor wire (15) to connect the lower sensor wire (12) to the console (04).
2. Now attach the console to the separate console bracket (06). Now you can put the console in another
place.
CHECK IF ALL BOLTS AND NUTS ARE
TIGHTENED BEFORE USING THE DE-
VICE!
19