Scandika LITEN Instructions De Montage Et Mode D'emploi page 17

Assembly instructions
Before starting to assemble we recommend to look for a place with sufficient space. Use a floor protection.
Remove all parts from the carton and spread them on the floor. Check according to the checklist, if all parts
are complete. Perhaps some parts are already pre-assembled for your convenience.
We recommend to use the provided tools to set-up this device.
Step 1
Mount the handlebars (05) on the front stabilizer (02) with the help of the screw set (16). Fix the front sta-
bilizer (02) on front part of main frame (01) with 2 screws (07), 2 curved washers (08) and 2 nuts (09). Now
fix the rear stabilizer (03) on rear part of main frame (01) with 2 screws (07), 2 curved washers (08) and 2
nuts (09).
No. Description
01 Main frame
02 Front stabilizer
03 Rear stabilizer
04 Console
05 Handlebars
06 Separate console bracket
07 Carriage bolt
08 Curved washer
09 Nut
13/14 Pedals
15 Sensor wire (middle part)
16 Screw set
Wrench
Allen key
Q'ty
1
1
1
1
1
1
4
4
4
1/1
1
1
1
1
17