Publicité
The molding on the Bottom Panel
(B) and the tray slide track face the
front when the unit is turned upright.
6. Orient and fasten the Partition Panel (E) to the Bottom Panel (B) using two 50 mm Screws (5).
7. Align and attach the Top Stretchers (F) to the Partition Panel (E) by engaging and tightening two Cam
Locks (1). Turn the cam locks with a Phillips screwdriver until securely locked onto the cam bolts. (Refer
to page 3 on Cam Lock system operation supplement).
8. Attach the Left Side Panel (C) to the Top Stretchers (F) and the Bottom Panel (B) by engaging and tightening
four Cam Locks (1).
Assembly Instructions
E
1
F
F
E
The cam lock housings face
backward of the unit.
B
C
8
5
5
1
Publicité
