Publicité
8
K
8
14. Ask for assistance to turn the unit upright.
15. Completely tilt the Adjustable Shelf (K) into the compartment as shown, then hold it horizontally to the
upper portion of the compartment.
16. Proceed to insert four Shelf Supports (8) into the holes at the desired height under the Adjustable
Shelf (K). Then, rest the Adjustable Shelf (K) onto the Shelf Supports (8).
17. To insert the Slide Tray (H) into the open compartment. Extend the Ball Bearing Slide Tracks on the
panels all the way forward (including ball bearing cart). Then align the Slide Runners on the tray with the
Slide Tracks and push the tray carefully inside until it stops.
NOTE: If the slide tray does not go in smoothly, please take it out and repeat the step. If you need to
remove the tray, please pull the tray all the way out, then simultaneously pushes the plastic release lever
of the ball bearing slides up on one side and down on the other side, and then pull it completely out.
Assembly Instructions
90°
C
A
E
11
A
E
K
D
H
Drawer Installation
FRONT
Ball bearing cart
Ball bearing cart
FRONT
Publicité
