Publicité
AUTOMATIC ICEMAKER DOES NOT WORK
Check if...
Icemaker switch in the O (off) position.
Water supply turned off or not connected.
Freezer compartment too warm.
Piled up cubes in the storage bin causes
the icemaker to shut off.
CUBES PRODUCED BY ICEMAKER ARE TOO SMALL
Check if...
Water shutoff valve is not fully open or the
water supply pressure is not adequate.
ICE CUBES ARE FREEZING TOO SLOWLY
Check if...
The doors have been left open.
Temperature control not set cold enough.
ICE CUBES HAVE A BAD TASTE OR ODOR
Check if...
Ice storage bin needs cleaning.
Food transmitting odor/taste to ice cubes.
Interior of refrigerator needs cleaning.
TROUBLESHOOTING GUIDE
Then...
Move the switch to the I (on) position.
See Connecting the Water Line.
After installing icemaker, wait 24 hours for
freezer to reach its set temperature.
Recommended freezer temperature is 0
degrees F (-18°C).
Level cubes by hand.
Then...
Check water supply for proper pressure.
Recommended pressures is 20 -120 psi
(138 - 827 kPa).
Then...
Check to ensure doors are closed properly.
Refer to refrigerator's Owner's Manual
to the Control Panel Features for
temperature adjustments.
Then...
Empty and thoroughly wash the ice bin.
Cover or wrap food items to prevent the
spread of odors.
Refer to refrigerator's Owner's Manual.
The Care and Cleaning section see
General Cleaning Tips.
16
Publicité
