Publicité
WATER VALVE INSTALLATION
Water
Line
Installation
Remove the protective cap and push
the water line into the opening all the
way. Secure it with 2 screws.
6. ATTACH THE BACK COVER
Fasten the back cover with the previously removed screws.
. 7 CONNECT TO WATER LINE
To connect to the home water supply, refer to the Water
Line Installation Instructions within the refrigerator's
Owner's Manual.
Once the home water supply line is connected and
turned on, be sure to turn the icemaker switch to the I
(on) position.
The icemaker will require 12 to 24 hours for ice to be
produced.
It is recommended to discard the first few batches of ice
prior to using a batch for consumption.
Remove the protective cap and push
the water line into the opening all the
way until the plastic mount reaches
the back of the unit. Firmly press the
mount downward slightly. Continue
pushing the mount all the way in until
it clicks into place.
13
Publicité
