Publicité
Loosen the screw, remove the bracket from the valve assembly, and
replace the bracket on the valve assembly using a Phillips screwdriver.
The bracket attached to the existing valve is an MR type, so replace it with a VN
type if necessary.
INSTRUCTIONS
1. REMOVE THE BACK COVER
Remove the back cover of the refrigerator
using a Phillips screwdriver.
2. CONNE CT THE WATER VALVE WIRE HARNESS
Facing the back of the refrigerator, locate the
wiring harness for the water valve at the lower
right side. Plug the connector of the water
valve harness onto the refrigerator terminals.
WATER VALVE INSTALLATION
11
Publicité
