Publicité
6. OPERATION
This precision hair trimmer with T-blade and zero gap design is suitable
for carving, tapered cuts, and beard styling.
1. Make sure the clear protective cap is attached to the appliance.
2. Attach the desired guide comb to the trimmer. Or use the trimmer
without any comb attachment to trim hair close to the skin.
3. Press the Power button to turn on the appliance and start trimming
your hair.
4. Once you have finished using the appliance, press the Power
button to turn off the appliance.
7. CLEANING AND CARE
WARNING: Before cleaning, always turn off and unplug
the appliance from the power outlet.
WARNING: To protect against fire, electric shock, or
damage to the appliance, never immerse the appliance,
power cord or plug in water or any liquid. Do not
rinse these parts under the tap. The appliance is not
waterproof.
1. To clean the trimmer head, remove the clear protective cap and
use the cleaning brush to remove hair and debris from the blades.
Reattach the clear protective cap after cleaning.
2. Wipe the main body with a soft moist cloth. Allow to air dry.
3. Attach the blade cover to protect the trimmer blades during storage.
4. To keep the blades lubricated, add 1 or 2 drops of clipper oil
(not included) on the blades and turn on the appliance for a few
seconds. Perform this step after use, or when the Lubrication
indicator illuminates on the display.
IMPORTANT: Do not use hair oil, grease, oil mixed with kerosene or
any solvent. The solvent will evaporate and leave a thick oil that can
slow the movement of the blades. Never use solvents, chemical or
abrasive cleaning agents, wire brushes, sharp objects or scouring
pads to clean the appliance.
9
EN
Publicité
