Publicité
EN
olakids
Put the gaskets, front wheel, gaskets and nut into the front axle in
turn.
Fix the nut with the M10 wrench and then attach the front wheel
cover to the wheel.
Place the rear wheel,gaskets, and nut on the rear axle in turn.
Fix the nut with the M10 wrench and then attach the rear wheel
cover to the wheel.
Turn over the body so that its body faces up.
L
Fix the chimney.
● Clip chimney into the body slot.
H
J
Put the bucket arm, gaskets and nut into the bucket axle in
turn.
Fix the nut with the M10 wrench and then attach the bucket
arm cover to the bucket arm. (Note: the bucket arm is
divided into left and right, as shown in the figure)
Note: When installing the front bucket arms, you need to tap
them into place.
I
08
Publicité
