Publicité
Les langues disponibles
Les langues disponibles
EN
olakids
speed LED light flashing) , remove the battery and repeat steps
P: Press to brake
S: Speed:press to change speed (low, middle and high speed).
△Forward
▽Backward
Turn left
Turn right
2)Brake button: Press it to stop moving; press it again to move.
3)Speed selection key and speed indication: used to select speed of
the car. Press the key once to switch the speed once. 3 speeds are
cyclically switched, and the switching sequence is:
low-medium-high. The speed indicator is arranged from top to
bottom on the remote control: high-speed lamp, medium-speed
lamp, low-speed lamp; when switching to one speed, the
corresponding indicator lamp will light up. Note: The speed grade
changes only when moving forward
4)Forward/backward keys: used for forward and backward
movement control. When one of the keys is pressed, the moving
speed will slowly increase to reach the set speed level. Therefore,
children will not have a sudden impact.
5)Left turn/right turn key: used for left and right direction control.
Note: without operation after 10 seconds, indication light will be off
into power saving mode
WARNING: The remote control is not a toy. It is for the adult use
only, and should not be used by a child. Close adult supervision is
always required. Reception range may change significantly with
weather, battery, and other environmental conditions.
14
Publicité
