Publicité
• Connect the USB cable to an available USB
input on your TV or set-top box.
• Alternatively, use an external USB power
supply unit to provide the power.
• Now switch the source and playback
devices on.
Note
For perfect 4K signal transmission, the total
length of the cables should not exceed
6 metres. For longer signal paths, we
recommend the use of active HDMI cables.
8. Operation
• During commissioning, the resolutions of the
monitors are checked and the input signal is
adjusted (scaled) accordingly. The button (4)
retriggers the scaling process if required.
• The green LED shows that OUTPUT 1 is active.
• The blue LED shows that OUTPUT 2 is active.
9. Troubleshooting
Problem
Solution
No picture
Check:
- The correct connection of
all cables
- That the correct channel
has been set on the output
device
- That all devices are
switched on
No sound
Check that all devices are
properly connected and
switched on.
10. Care and maintenance
Only clean this product using a lint-free, slightly
damp cloth and do not use any harsh cleaners.
11. Warranty disclaimer
Hama GmbH & Co KG assumes no liability and
provides no warranty for damage resulting from
improper installation/mounting, improper use
of the product or from failure to observe the
operating instructions and/or safety notes.
12. Technical data
Power supply
Connections
HDMI
Resolutions
Max.
video bandwidth
Transfer
Dimensions
(L x W x H)
USB-C
1 x HDMI in
2 x HDMI out
1 x USB-C (power
supply)
480p, 576p, 720p,
1080p, 4K@30Hz
3.4 Gbps / 340
MHz
per channel
Bidirectional
71.5 x 32 x 14.5
mm
3
Publicité
