Publicité
Installations (continued)
DOOR REVERSAL
This appliance comes with a reversible door feature, allowing you to set the opening direction to either the left or right
based on your preference. Follow the steps below to reverse the door. If you prefer, change the door swing before
installing the appliance.
CAUTION: For your safety and to prevent damage, it's strongly advised to have someone assist you during the
door reversal process.
Before starting, ensure the unit is powered off, and disconnect the power plug from the outlet.
Step 1
Take off the plastic caps from the top left side of the
unit. Save them to cover holes on the right side after
reversing the door.
Step 3
Hold the door, loosen the screws, and remove the upper
hinge. Be sure to keep a firm grip on the door while
performing this step.
Step 5
Unscrew and remove the right lower hinge axis.
Step 7
Turn the door 180° and position it on the left-side lower
hinge, holding it in the closed position.
Step 9
Attach the upper hinge to the top of the unit. Adjust the door to ensure it is level with the top of the unit. Then, tighten
all the screws. Place the hinge cover, open the door, and secure the screw.
Step 2
Open the door, loosen the screw, and remove the upper
hinge cover.
Step 4
Lift the door, remove it from the lower hinge, and place it
on a padded surface to prevent damage and scratches.
Step 6
Install the hinge axis to the left lower hinge.
Step 8
Switch the upper hinge direction and attach it to the top
of the door. Avoid fully tightening the screws until the top
of the door aligns with the unit's top
15
Publicité
