Publicité
8 - Adjusting the height of the seat
Press the button on each seat
height adjuster to lower the
seat(7).Pull the seat height
adjusters upwards to raise the
seat. The seat has 7 height
positions,position 1 being the
highest. The seat height is
shown in a window in the seat
height adjusters.Ensure the
same seat height number as
the same on each side of the
highchair.
9 - Fitting the tray
Pull the lever underneath the tray back (8) then slide the tray into the channels
on the sides of the armrests (8a). Release the lever then move the tray slightly
until it locks in place.
WARNING: Ensure the tray is pushed far enough into the highchair. Numbers
on top of the arm rests show the position of the tray. NEVER use the tray if the
symbol is visible.
Check the security of the tray before use by pulling it outwards slightly.
08
10 - Removing the inner tray
To remove the inner tray (9), pull the clips out on inner sides then lift the inner
tray off the tray.
To refit the inner tray, place over the tray and push down on the clips until the
inner tray locks in place.
Press down at the front and back to secure the center of the inner tray.
11 - Storing the tray to the high chair legs
When not in use, the tray can be clipped to the rear legs of the highchair (10).
Place the tray on to the legs as shown. The pins in the tray fit to the holes on
the legs. Once fitted, push the tray down to lock the tray in place.
To remove the tray, lift the tray upwards and pull the tray away from the legs.
09
Publicité
