Publicité
4 - Assembling the armrest
Caution: The left and right armrest marked with"L" "R" to prevent them
being assembled the wrong way.
Following the Fig3a, press the right armrest to fix it on the seat, repeat the
same process with the left armrest.
Once the assembly is completed, push the armrest to check if it is locked on
the seat firmly (Fig 3b).
5 - Assembling the foot
Fit the front foot (4). The front foot has 2 stoppers. Push in the spring loaded
pins on each side then fit the ends of the foot into the bottom of the front legs
until the spring loaded pins locate in the holes in the front legs.
Repeat this procedure with the rear foot (4a).
06
6 - Raising and lowering the backrest
The backrest has 3 recline positions.
To the position of the backrest, lit the lever at the back of the seat and raise or
lower the backrest to the desired position. Release the lever. The backrest
should then locate into one of the 3 sets of slots at the rear of the armrests (5).
7 - Adjusting the footrest
The footrest can be set at 2 positions. Press down the levers (6) on both sides
simultaneously then raise or lower the footrest to the desired position. Release
buttons then move the footrest slightly until it locks in position.
The insert footpad can be set at 3 positions. By pushing into the holes to the
desired position (6a).
07
Publicité
