Publicité
FEATURE GUIDE
Start here to embark on your Corvo EKG journey
➀
TURN ON
Push the dial to
turn on your kettle.
➂
HOLD MODE
Hold mode maintains your set temperature for 60 minutes. If hold mode is
off, your kettle will reach set temperature, stay there for 5 minutes, then stop
heating and go into standby for 15 minutes before turning off. When you have
toggled hold mode on, the screen will flash "HOLD ON." Screen will show
"HOLD" when kettle is holding your set temperature.
➁
HOLD AND F/C
Use the back toggles to choose
temperature and hold settings.
➃
SET TEMPERATURE
Twist the dial to set desired
temperature. Screen will show
"SET" when temperature
is being set.
➅
START/STOP BREW STOPWATCH
To start or stop the Brew Stopwatch,
hold down the dial for 2 seconds.
Push dial again to stop the stopwatch
and return to main screen.
➇
➄
HEATING
When the F/C is blinking, the kettle
is heating. The top number on your
screen is your set temperature , and
the bottom is your current temperature .
➆
SET TEMPERATURE REACHED
Once your SET temperature is
reached, your kettle will steadily
maintain that temperature thanks
to the smart PID controller.
TURN OFF
Push the dial
to turn off kettle.
Publicité
