Publicité
EN
APPLICATION
This is mainly used for drilling in wood,
metal and screwing, impact drilling in
concrete. Use machine and accessories
only for intended applications. All other
applications are expressly ruled out.
SPECIAL SAfETY RULES
Before drilling into walls make sure that
you are not breaking into an electricity,
gas or water supply line. Use a detector.
Always unplug drill before changing
drill or bit.
The chuck key should always be stored
in the key holder.
To avoid injures, securely attach the
work piece with vice or clamp.
When drilling or driving screw: Do
not allow the motor to stall under
the load.
In the event of an electrical
or mechanical malfunction,
immediately switch off and
disconnect the plug.
: Wear ear protectors
WARNING
with impact drills. Exposure to nois
can cause hearing loss.
Use auxiliary handles supplied with
the tool. Loss of control can cause
personal injury.
10
CONSTRUCTION AND
OPERATION
IMPACT DRILLING/
DRILLING SWITCH
Position on "drilling" when drill
holes in wood or metal. Position
on "impact drilling" when drill
holes in concrete. Variable speed
is controlled by pressing the
trigger and adjusting the knob on
the switch. Set the reversing "and
forward" switch to get clockwise
and anti-clockwise rotation.
The chucks of reversible drills are
always fixed by a screw with a left
hand thread. The screw must be
loosed before the chuck can be
removed. To loosen the screw, turn
it in a clockwise direction.
SERVICE HINTS
Store the machine, Operating
instructions and where necessary the
accessories in the original packaging.
In this way you will always have all the
information and parts ready to hand.
Devices are to a large extent free of
maintenance, you only need a damp
cloth to clean the casing. Do not drop
electrical machines into water. Please
note additional hints given in the
operation instructions.
DECLARATION
Of CONfORMITY
We declare under our exclusive
responsibility, that the product
Impact drill with hammer mode,
with the code ITBE500A,
meets the following standards or
standardization documents:
EN 60745-1, EN 60745-2,
EN 55014-1 and EN 55014-2,
according to the determinations of the
directives:
2004/108/CE - Electromagnetic
Compatibility Directive;
2006/42/CE - Machinery Directive;
2000/14/CE - Sound power level
guaranteed: 85 dB.
S. João de Ver,
September 18th of 2015.
Central Lobão S. A.
Responsible for the Technical File
WARRANTY TERMS
The warranty of this machine is two
years from the date of purchase. You
should, therefore, keep your proof of
purchase during this period of time.
The warranty covers any manufacturing
defect in material or operating, as well
as parts and work needed for their
recovery.Excluded from the warranty
the misuse of the product, any repairs
carried out by unauthorized persons
(outside the service center of the
brand ITOOLS) as well as any damage
caused by the use of it.
15
Publicité
