Entsorgung; English; Safety Notes; Product Description And Specifications - Bosch PMD 10 Notice Originale

OBJ_BUCH-1380-004.book Page 13 Wednesday, April 20, 2011 10:12 AM

Entsorgung

Messwerkzeuge, Zubehör und Verpackungen sollen einer umweltgerechten
Wiederverwertung zugeführt werden.
Werfen Sie Messwerkzeuge und Akkus/Batterien nicht in den Hausmüll!
Nur für EU-Länder:
Gemäß der europäischen Richtlinie 2002/96/EG müssen nicht
mehr gebrauchsfähige Messwerkzeuge und gemäß der europäi-
schen Richtlinie 2006/66/EG müssen defekte oder verbrauchte
Akkus/Batterien getrennt gesammelt und einer umweltgerech-
ten Wiederverwendung zugeführt werden.
Nicht mehr gebrauchsfähige Akkus/Batterien können direkt abgegeben werden
bei:
Deutschland
Recyclingzentrum Elektrowerkzeuge
Osteroder Landstraße 3
37589 Kalefeld
Schweiz
Batrec AG
3752 Wimmis BE
Änderungen vorbehalten.

English

Safety Notes

Read and observe all instructions. SAVE THESE INSTRUC-
TIONS FOR FUTURE REFERENCE.
Have the measuring tool repaired only through qualified specialists us-
ing original spare parts. This ensures that the safety of the measuring tool is
maintained.
Do not operate the measuring tool in explosive environments, such as in
the presence of flammable liquids, gases or dusts. Sparks can be created
in the measuring tool which may ignite the dust or fumes.
For technological reasons, the measuring tool cannot ensure 100 % cer-
tainty. To rule out hazards, safeguard yourself each time before drilling,
sawing or routing in walls, ceilings or floors by means of other informa-
tion sources, such as building plans, pictures from the construction
phase, etc. Environmental influences, such as humidity or closeness to elec-
trical devices, can influence the accuracy of the measuring tool. Surface qual-
ity and condition of the walls (e.g., moisture, metallic building materials, con-
ductive wallpaper, insulation materials, tiles) as well as the amount, type, size
and position of the objects can lead to faulty measuring results.

Product Description and Specifications

Intended Use

The measuring tool is intended for the detection of metals (ferrous and non-fer-
rous metals, e.g., rebar), joists and "live" wires/conductors in walls, ceilings and
floors.
Bosch Power Tools
English | 13
2 609 140 838 | (20.4.11)