Publicité
Open the Ethernet door to connect an Ethernet cable to the Ethernet port, connect the other end of the
Ethernet cable to the included PoE injector;
Plug the PoE injector into your network switch;
Plug the included power supply into the PoE injector to start up the device;
Mount the devices on the mast or pole;
Align both units;
Download WinBox configuration tool https://mt.lv/winbox;
Default IP for the master unit: 192.168.88.2, slave unit: 192.168.88.3, user name: admin and password
is printed on the label, that can be found inside the device cover;
In case the IP connection is not available, please use the Neighbors tab and connect through MAC
address;
For LHG 60G models, default IP: 192.168.88.1, and there is no password;
Once connected configure the device, so it has an active Internet connection https://mt.lv/configuration;
Upgrade the RouterOS software to the latest version https://mt.lv/upgrade;
Choose your country, to apply country regulation settings.
Safety Information:
Before you work on any MikroTik equipment, be aware of the hazards involved with electrical
circuitry, and be familiar with standard practices for preventing accidents. The installer should be
familiar with network structures, terms, and concepts.
Use only the power supply and accessories approved by the manufacturer, and which can be found in
the original packaging of this product.
This equipment is to be installed by trained and qualified personnel, as per these installation
instructions. The installer is responsible for making sure, that the Installation of the equipment is
compliant with local and national electrical codes. Do not attempt to disassemble, repair, or modify the
device.
This product is intended to be mounted outdoors on a pole but can also be installed indoors. Please read
the mounting instructions carefully before beginning installation. Failure to use the correct hardware
and configuration or to follow the correct procedures could result in a hazardous situation for people
and damage to the system.
We cannot guarantee that no accidents or damage will occur due to the improper use of the device.
Please use this product with care and operate at your own risk!
In the case of device failure, please disconnect it from power. The fastest way to do so is by unplugging
the power adapter from the power outlet.
Publicité
