Télécharger Imprimer la page

SilverCrest SSB 75 A2 Instructions D'utilisation Et Consignes De Sécurité page 8

Publicité

m DANGER! Risk of electric
shock! Never use a damaged
product . Disconnect the power
plug from the power supply
and contact your retailer if the
product is damaged .
The product is not to be used
 
if it has been dropped, if there
are visible signs of damage .
Before connecting the power
 
plug to the power supply, check
that the voltage and current
rating corresponds with the
power supply details shown on
the product's rating label .
Regularly check the power
 
plug and the power cord for
damages . If the power cord is
damaged, it must be replaced
by the manufacturer, its service
agent or similarly qualified
persons in order to avoid a
hazard .
Protect the power cord against
 
damages . Do not let it hang
over sharp edges, do not
squeeze or bend it . Keep the
power cord away from hot
surfaces and open flames .
Operation
m CAUTION! Risk of burns!
During use the product gets hot .
Do not touch the heating area
while in use nor immediately
after use .
Do not move the product while
 
it is in operation .
The heating area surface is
 
subject to residual heat after
use .
Cleaning and storage
m WARNING! Risk of
electric shock! Disconnect
the power plug from the power
supply before cleaning work
and when not in use .
m CAUTION! Risk of burns!
Do not clean the product right
after operation . Let the product
cool down first .
Clean the product after use
 
(see "Cleaning and care") .
Do not pull the power plug out
 
of the electrical outlet by the
power cord .
Protect the product, its power
 
cord and power plug against
dust, direct sunlight, dripping
and splashing water .
Store the product in a cool,
 
dry place, protected from
moisture and out of the reach of
children .
GB/IE/NI
9

Publicité

loading

Ce manuel est également adapté pour:

460216 2401