Publicité
Les langues disponibles
Les langues disponibles
TECHNOLOGY SETTINGS
ODOUR DIAL
Flip up the dial handle and rotate the odour dial
to adjust odour neutralizer technology intensity
or to unlock the dial for cartridge access.
Insertion/Removal: Rotate the odour dial to align the teal arrows.
Remove the dial to access the odour cartridge for removal or replacement.
Low: Rotate the dial toward the Low position to decrease the intensity to the
lowest level when the vacuum is in use.
High: Rotate the dial toward the High position for the highest intensity level when
the vacuum is in use. This position is the recommended setting for optimal performance.
ODOUR NEUTRALIZER TECHNOLOGY TIPS
Odour Dial Must be Installed for Vacuum to Function Properly
• Remove odour cartridge from dial if you don't want the benefits of the
odour neutralization technology.
Maintenance Required
• Clean all filters as recommended under Cleaning Filters.
• Empty the dust cup before storing your vacuum.
• Replace the cartridge as recommended under Odour Cartridge Replacement.
• Visit qr.sharkclean.com/odourtech to learn more and purchase replacements.
• If wet pet messes are cleaned up, thoroughly clean the vacuum.
Fragrance Strength Over Time
• The intensity of the odour neutralizer technology's fragrance may diminish over time. It may
also have no noticeable fragrance at all. This is natural and does not indicate the technology
isn't working. Follow replacement instructions to ensure continued performance.
NOTES: • The odour dial needs to be installed for the vacuum to function properly, with or without the odour cartridge.
•Odour Neutralizer technology effectively deodourizes while interacting with odours from inanimate sources.
s h a r kc l e a n . c a
SETTINGS
ODOUR NEUTRALIZER TECHNOLOGY
ODOUR CARTRIDGE REPLACEMENT
1. REMOVE ODOUR DIAL
FROM NOZZLE
Flip up the handle and rotate the dial clockwise
until the two teal arrows are aligned. Pull the
handle to remove the dial from the nozzle.
3.REMOVE NEW CARTRIDGE
FROM CAN
Remove the new cartridge from the can. To
maintain the life of the cartridge, keep it in the
can until you are ready to install it.
5. INSTALL DIAL IN NOZZLE
Align the teal arrow on the dial cover with
the teal arrow on the nozzle, then reinsert
the dial into the nozzle. Rotate the dial
counterclockwise until it clicks into an
intensity setting to engage. Rotate further
to change the intensity setting.
2. REMOVE OLD ODOUR
CARTRIDGE
Rotate the cartridge counterclockwise in the dial
housing and pull out the cartridge to remove it.
TURN UNTIL
CLICK TO LOCK
4. INSTALL NEW CARTRIDGE
IN DIAL
Align the yellow arrow on the side of the cartridge
with the yellow arrow on the side of the dial
cover, then insert the cartridge into the dial.
Rotate the cartridge clockwise to lock it in place.
6. USED CARTRIDGE
DISPOSAL
Dispose of the old cartridge by dropping
it into the trash.
NOTE: Odour cartridges should be replaced every
6 months for optimal odour neutralizer technology
performance.
s h a r kc l e a n . c a
Publicité
