Reelcraft 30000 Serie Instructions D'opération

Operating Instructions
Series 30000 Electric Motor Driven Reels
High Pressure Wash Model Numbers:
EA38106 M12D EA38112 M12D
Dimensional Data
C
Safety Precautions
Personal injury and/or equipment
damage may result if proper safety
precautions are not observed.
• Ensure that the reel has been properly
installed before connecting supply line
(see installation instructions).
• Bleed fluid/gas pressure from system
before servicing reel.
• Before connecting reel to supply line
ensure that supply line pressure does
not exceed maximum rated working
pressure of reel.
Reelcraft Industries, Inc. • 2842 E Business Hwy 30, Columbia City, IN 46725
Ph: 800-444-3134 / 260-248-8188 • Fax: 800-444-4587 / 260-248-2605
Customer Service: 855-634-9109 • feedback@reelcraft.com • www.reelcraft.com
B
20 1/4"
(514 mm)
D
9"
(229 mm)
Ø 0.531"
(4) Places
• Do not play pranks on other personnel.
Even low pressure is very dangerous
and can cause irrepairable damage or
death.
• Do not wear loose fitting clothing while
operating reel.
• Be aware of other personnel in work
area.
• Be aware of other machinery in work
area.
17 3/4"
(451 mm)
11 3/8"
(289 mm)
12 3/4"
(324 mm)
EA38106 M12D EA38112 M12D
B
6"
C
17 7/8"
D
9 3/4"
• If a leak occurs in the hose or reel,
remove supply line pressure
immediately.
• Check for loose, frayed, and/or broken
wires before operating.
• Treat and respect a hose reel as any
other piece of machinery, observing all
common safety practices.
12"
23 7/8"
15 3/4"
Form #1246-213 Rev: 11/2024